Description
The Lifud LF-GOE200YV012A is a 200W constant voltage LED power supply delivering reliable 12V DC output at 16.67A. Engineered with IP67 waterproof rating and industrial-grade aluminum housing, this transformer is specifically designed for demanding outdoor LED lighting installations across Australia. Featuring 93% energy efficiency, comprehensive electrical protections, and SAA/TUV/CE certifications, it comes with a 5-year warranty and a 1-metre AU plug for plug-and-play installation.
Best for: Outdoor garden lighting, landscape illumination, LED flood lights, LED strip installations, commercial signage, and pool lighting in Australian conditions.
Key Features
● IP67 Waterproof Rating — Fully sealed aluminum housing protects against dust ingress and water immersion up to 1 metre. Suitable for outdoor, garden, and wet location installations.
● 93% Energy Efficiency — High-efficiency conversion reduces electricity costs and heat generation, extending the product lifetime beyond 50,000 hours.
● Wide Input Voltage Range — Accepts 100-277VAC (limit: 90-305V), compatible with Australian 240V mains power without additional equipment.
● Adjustable Output Voltage — Built-in potentiometer allows fine-tuning output from 11.04V to 12.96V (92-108%) to match your specific LED setup requirements.
● Complete Protection Suite — Surge protection (6KV L-N, 8KV L/N-GND), over-voltage protection (≤16V auto-recovery), short circuit protection (hiccup mode auto-recovery), and over-temperature protection.
● Ultra-Low THD & High PFC — Power factor ≥0.95 and extremely low total harmonic distortion ensure stable operation and compliance with grid standards.
● Australian Ready — Includes 1-metre AU plug cable, SAA/RCM certified for full compliance with Australian electrical safety standards.
● 5-Year Warranty — Backed by Lifud’s comprehensive 5-year replacement warranty for peace of mind.
Technical Specifications
|
Specification |
Value |
|
Model |
LF-GOE200YV012A |
|
Input Voltage |
100-277VAC (90-305V limit), 50/60Hz |
|
Output Voltage |
12V DC (adjustable 11.04-12.96V) |
|
Output Current |
16.67A max |
|
Output Power |
200W |
|
Efficiency |
Up to 93% |
|
Power Factor |
≥0.95 @ 230VAC full load |
|
THD |
Extremely low |
|
IP Rating |
IP67 (waterproof & dustproof) |
|
Operating Temperature |
● 20°C to +40°C (Tc ≤75°C for warranty) |
|
Storage Temperature |
● 40°C to +85°C |
|
Dimensions |
221mm (L) × 61mm (W) × 34mm (H) |
|
Housing Material |
Aluminum alloy |
|
Flicker Percentage |
≤1% |
|
Input Connection |
1m AU plug cable |
|
Output Connection |
Sheathed cable 250mm, 1.8m total |
|
Dimmable |
No |
|
Cooling |
Free air convection (no fan) |
|
Certifications |
TUV-ENEC, CE, RCM, SAA, UL (Class P), CB, CCC |
|
Warranty |
5 years |
Recommended Applications
Outdoor & Garden Lighting
● LED garden spotlights and path lights
● Landscape lighting systems
● Deck and patio LED strips
● Pool and fountain lighting (IP67 rated for wet environments)
Commercial & Industrial
● LED flood light installations
● Commercial signage backlighting
● Building facade lighting
● Security and CCTV camera power
Residential
● Outdoor LED strip installations
● Gazebo and pergola lighting
● Driveway and entrance illumination
Load Calculation Tip: For optimal performance and longevity, operate at 80% of rated capacity (160W max load). This provides a 20% safety margin and reduces thermal stress.
What’s in the Box
● 1 × Lifud 200W 12V DC IP67 LED Transformer
● 1 × Mounting hardware kit (screws & brackets)
● 1 × User manual
Installation Notes
⚠️ Important: This device must be installed by a licensed electrician in accordance with AS/NZS 3000 wiring rules and local regulations.
● Ensure adequate ventilation around the transformer
● Do not immerse in water or bury underground (IP67 protects against water jets and temporary immersion, not permanent submersion)
● Maintain minimum 20% power reserve below rated 200W capacity
● Install in location protected from direct sunlight where possible to maximize lifespan
Frequently Asked Questions
General Questions
Q1: Is this LED transformer suitable for outdoor use in Australia?
A: Yes, the Lifud LF-GOE200YV012A is specifically designed for outdoor Australian conditions. It carries an IP67 waterproof rating (protected against dust and water immersion up to 1 metre), SAA/RCM certification for Australian electrical safety compliance, and operates reliably in temperatures from -20°C to +40°C. The included 1-metre AU plug ensures direct connection to Australian 240V power outlets.
Q2: What does IP67 rating mean for this transformer?
A: IP67 means the transformer is completely dust-tight (6) and protected against temporary water immersion up to 1 metre depth for 30 minutes (7). This makes it suitable for outdoor garden lighting, landscape installations, and wet locations. However, it should not be permanently submerged or buried underground.
Q3: How many LED strip lights can this 200W transformer power?
● A: The number depends on your LED strip’s power consumption per metre. For example:14.4W/m LED strips: Up to 11 metres (operating at 80% capacity: 8.9 metres)
● 10W/m LED strips: Up to 16 metres (at 80%: 12.8 metres)
● 7.2W/m LED strips: Up to 22 metres (at 80%: 17.6 metres)
Always calculate total wattage and maintain at least 20% headroom below the 200W rating for optimal performance and longevity.
Q4: Is this transformer dimmable?
A: No, the LF-GOE200YV012A is a non-dimmable constant voltage LED driver. It provides a fixed 12V DC output. If you require dimming functionality, you would need to install a separate dimmer controller between the transformer and your LED lights, or choose a dimmable LED driver model.
Q5: Can I adjust the output voltage?
A: Yes. The transformer includes a built-in potentiometer at the bottom of the unit that allows you to adjust the output voltage from 11.04V to 12.96V (92-108% of nominal 12V). This feature is useful for compensating voltage drop in long cable runs or fine-tuning brightness for your specific LED installation.Installation & Technical
Q6: Do I need an electrician to install this transformer?
A: Yes. As a high-powered electrical device (200W, 240V AC input), this transformer must be installed by a licensed electrician in accordance with AS/NZS 3000 Australian wiring rules and local electrical regulations. Improper installation voids the warranty and may create safety hazards.
Q7: What size cable should I use between the transformer and my LED lights?
● A: Cable size depends on total current draw and cable length. For 12V systems:Up to 5A (60W): 1.5mm² cable for runs up to 5 metres
● 5-10A (60-120W): 2.5mm² cable for runs up to 5 metres
● 10-16.67A (120-200W): 4mm² cable for runs up to 3 metres
For longer runs, use thicker cable or multiple home-run connections to minimize voltage drop. Voltage drop beyond 5% can cause noticeable brightness reduction.
Q8: Can I connect multiple LED strips to this single transformer?
A: Yes, you can connect multiple LED strips in parallel (not series) to the output, provided the total wattage does not exceed 200W (recommended: 160W for 20% headroom). Use proper terminal blocks or connectors rated for the total current. Do not exceed 16.67A total output current.
Q9: What happens if there’s a power surge or short circuit?
● A: The transformer includes comprehensive protection mechanisms:Surge protection: Handles up to 6KV line-to-neutral and 8KV line-to-ground
● Short circuit: Enters hiccup mode (pulsed restart attempts) and auto-recovers when fault clears
● Over-voltage: Output shuts off when exceeding 16V, auto-recovers
● Over-temperature: Reduces output or shuts down when internal temperature exceeds safe limits, auto-recovers when cooled
Q10: How efficient is this transformer compared to standard power supplies?
A: At up to 93% efficiency, this Lifud transformer is among the most efficient in its class. Standard power supplies typically range from 80-85% efficiency. The 93% rating means only 7% of input energy is lost as heat, reducing electricity costs and thermal stress on components, which directly contributes to the extended 5-year warranty period and >50,000 hour expected lifespan.Compatibility & Use Cases
Q11: Will this work with 24V LED strips?
A: No. This transformer outputs 12V DC only. Using it with 24V LED strips will result in dim operation or failure to light. If your LED system requires 24V, you need the 24V version of this transformer (LF-GOE200YV024A). Always match your power supply voltage to your LED device’s rated voltage.
Q12: Is this transformer suitable for pool or fountain lighting?
A: The IP67 rating provides protection against temporary water immersion, making it suitable for humid environments and areas exposed to rain or splashing. However, for permanent underwater installations (submerged for extended periods), IP68-rated equipment is recommended. Install the transformer in a well-ventilated, covered location near — not inside — the water feature.
Q13: Can I use this transformer indoors?
A: Absolutely. While designed for outdoor durability, this transformer performs equally well for indoor applications such as under-cabinet lighting, kitchen LED strips, mirror lighting, and display case illumination. The IP67 rating and silent operation (no cooling fan) make it versatile for any environment.
Q14: What certifications does this transformer have?
A: This transformer carries multiple international certifications: TUV-ENEC (European safety), CE (European conformity), RCM/SAA (Australian/New Zealand safety and EMC), UL Class P (North American safety), CB (global safety certification), and CCC (China Compulsory Certification). These certifications ensure compliance with stringent safety and performance standards worldwide.
Q15: What is the warranty and what does it cover?
A: EDO LED Lighting provides a 5-year replacement warranty on this Lifud transformer. The warranty covers manufacturing defects, component failures under normal operating conditions, and performance degradation below specified parameters. The warranty is conditional on installation by a licensed electrician, operation within specified parameters (temperature -20°C to +40°C, Tc ≤75°C), and maintaining at least 20% load headroom. Damage from improper installation, overloading, water submersion beyond IP67 specifications, or unauthorized modification is not covered.